Use this port for connection with an integrated control system that can enable home automation. Some integrated control systems provide a centralized operation with a single touch panel controller in order to control audio and video home appliances and security devices together. For more information about adopting an integrated control system, contact the specialized stores.
If you use a commercially available multiroom remote control kit with this jack, you can operate the unit with the remote controller even when you are in a separate room, or operate the unit with the remote controller even if its remote control sensor is difficult to see.
Other companies may use indications other than IR on their products. Confirm in the instruction manual included with your components.
Refer to the instruction manual of the IR receiver for the types of cables required for connection.
You can enable power link operation when you connect the unit and an external device such as power amplifier equipped with 12V trigger input jack. When the desired zone (Main/Zone2/Zone3) is turned on or off, power link operation will be activated with a control signal of maximum 12 V/100 mA from the 12V TRIGGER OUT A jack or maximum 12 V/25 mA from the 12V TRIGGER OUT B jack. You can select the zone to output the control signal in "5. Hardware" - "12V Trigger A"/"12V Trigger B" in the Setup menu. For connection, use a monaural mini plug cable.