Firmware Update

Updating the Firmware via Network


Check that the unit is turned on, and the connection to the Internet is secured.

Turn off the controller component (PC etc.) connected to the network.

Stop any playing Internet radio, USB storage device, or server content.

If the multi-zone function is active, turn it off.

If "HDMI CEC" is set to "On", set it to "Off".

Press 53392.png on the remote controller. Then, after selecting "5. Hardware" - "HDMI" and pressing ENTER, select "HDMI CEC" and select "Off".

* The description may differ from the on-screen display but that will not change the way to operate or the function.


If an Error Message is Displayed

SN 29402628AHTML
(C) Copyright 2016 Onkyo & Pioneer Corporation Japan. All rights reserved.