 |
Advanced Speaker Connection |
Bi-Amping
It is possible to connect speakers supporting bi-amping to improve quality of the low and high pitched ranges. Up to 5.1 ch will be played in bi-amping.
Connections
1.Connect as below using the FRONT terminals and BACK or HEIGHT terminals.
2.Turn the unit on and set "Speaker Setup" to "Bi-Amp".
1After pressing RCV, press HOME on the remote controller.
2With the cursors, select "Setup", and then press ENTER.
3With the cursors, select the order of "2.Speaker Setup" – "Speaker Settings" – "Front Speakers Type".
4Select "Bi-Amp" with the cursors and press ENTER.
Before bi-amping, be sure to remove the short-circuit connector that connects the tweeter (high pitched tone) terminal and the woofer (low pitched tone) terminal.
Use speakers supporting bi-amping only. For details, refer to the speakers' instruction manual.
SN 29401761HTML_EN
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
