 |
Advanced Settings |
4.Source Setup
Adjust the volume level difference among the multiple devices connected to this unit, rename an input selector, or adjust the image quality. The setting can be separately set to each input selector button. When you select a desired input to check the video or audio, start playback of the connected device.
AccuEQ Room Calibration
AccuEQ Room Calibration
Default Value : Off
Enable/disable the sound field set in automatic speaker setup
"On": Enable this function
"Off": Disable this function
In the following cases, the setting cannot be changed:
–Automatic speaker setup is not performed.
–Headphones are connected.
IntelliVolume
IntelliVolume
Default Value : 0 dB
Adjust the volume level difference between the devices connected to the unit. Select a value between "-12 dB" to "+12 dB". Set a negative value if the volume of the target device is larger than the others and a positive value if smaller.
This function is not effective in Zone 2.
Name Edit
Set an easy name to each input. The set name will be shown on the main unit display.
Name
Default Value : Input name
1.Select a character or symbol with the cursors and press ENTER.
Repeat it to input 10 or less characters.
"Shift": Switches between upper and lower cases. (Pressing +10 on the remote controller also toggles between upper and lower cases.)
"
" "
": Moves the cursor to the arrow direction.
"Back Space": Removes a character on the left of the cursor.
"Space": Puts a space.
Pressing CLR on the remote controller will remove all the input characters.
2.After inputting, select "OK" with the cursors and press ENTER.
The input name will be saved.
To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the preset number.
It cannot be set if the input is "NET", "USB" or "BLUETOOTH".
Picture Adjust
Adjust the image quality. (Possible only when the video player is connected to the HDMI OUT MAIN jack) If you adjust it by checking the video, press ENTER. Press RETURN to return the screen to the previous status.
Wide Mode
Default Value : Auto
Set the aspect ratio.
"Auto": The aspect ratio will automatically be set according to the input signals and the monitor output setting.
"4:3":
"Full":
"Zoom":
"Wide Zoom":
When a 3D or 4K video source is input, this setting is set to "Full". Furthermore, for some resolutions, this setting may be disabled and set to "Full".
Picture Mode
Default Value : Custom
An appropriate image quality setting for cinema or game will be selected. You can also adjust each item to obtain your favorite image quality.
"Custom": The items from "Game Mode" to "Color Temperature" below can be adjusted as desired.
"Cinema": When the video source is cinema
"Game": When the video source is game
"Standard": The resolution will be changed but the image quality will not be adjusted.
"Bypass": Both the resolution and image quality will not be adjusted.
If you select "Bypass", the on-screen display function will be disabled.
Game Mode
Default Value : Off
Change to the setting suitable for game. Also correct the delay of video signals of the game console if any.
"On": Use this function
"Off": Do not use this function
If you select "On", the delay will be corrected but the image quality will be lower.
The setting will be fixed to "Off" if "Resolution" is set to "4K".
Film Mode
Default Value : Auto
Change to the setting suitable for film.
"Auto": Image processing suitable for film will be executed.
"Video": "Film Mode" will not be applied and the input signals will be processed as video source.
Edge Enhancement
Default Value : Off
Adjust the sharpness of the outline of image. Select from "Off", "Low", "Mid" (Middle), and "High".
The setting will be fixed to "Off" if "Game Mode" is set to "On".
When the horizontal resolution of the output video is 2,000 TV lines or more, this setting is set to "Off".
Noise Reduction
Default Value : Off
Reduces the noise of the screen. Select from "Off", "Low", "Mid" (Middle), and "High".
The setting will be fixed to "Off" if "Game Mode" is set to "On".
Brightness
Default Value : 0
Adjust brightness of the screen. Select a value between "-50" to "+50".
Contrast
Default Value : 0
Adjust contrast of the screen. Select a value between "-50" to "+50".
Hue
Default Value : 0
Correct hue of the screen. Select a value between "-50" to "+50".
Saturation
Default Value : 0
Adjust saturation of the screen. Select a value between "-50" to "+50".
Color Temperature
Default Value : Normal
Set color temperature of the screen. Select from "Warm", "Normal" and "Cool".
In the following cases, the settings for "Picture Adjust" cannot be changed:
–"NET", "USB" or "BLUETOOTH" is selected.
–"Monitor Out" is set to "SUB".
Press CLR on the remote controller if you return all the settings from "Game Mode" through "Color Temperature" to their default value.
Audio Selector
Make the audio input setting. The setting can be separately set to each input selector button. Select the input selector to configure.
Audio Selector
Default Value : –
Allows you to select prior input source.
ARC: When giving priority to input signal from ARC compatible TV.
The setting can be selected only when "Audio Return Channel" is set to "Auto" and also the "TV/CD" input is selected.
HDMI: When giving priority to input signal from HDMI jacks
The setting can be selected only when the input is assigned to the HDMI IN jack in the "HDMI Input" setting.
"COAXIAL (Coaxial input)": When giving priority to input signal from DIGITAL IN COAXIAL jacks.
The setting can be selected only when the input is assigned to the COAXIAL jack in the "Digital Audio Input" setting.
"OPTICAL (Optical input)": When giving priority to input signal from DIGITAL IN OPTICAL jacks.
The setting can be selected only when the input is assigned to the OPTICAL jack in the "Digital Audio Input" setting.
"Analog": To always output analog audio independently of the input signal
Fixed Mode
Default Value : Off
Specify an input signal when "HDMI", "COAXIAL (Coaxial input)", or "OPTICAL (Optical input)" is selected for "Audio Selector". Set this item if noise is produced, or truncation occurs at the beginning of a track that follows a gap when playing PCM or DTS sources.
"Off": To play an analog signal when there is no digital signal.
"PCM": To fix the input source to PCM.
"DTS": To fix the input source to DTS (except for DTS-HD)
Changing "Audio Selector" changes the setting to "Off".
The setting cannot be changed when "TUNER", "NET", "USB" or "BLUETOOTH" is selected.
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
