 |
Advanced Settings |
1.Input/Output Assign
Monitor Out
The video input signals input to the unit will be converted when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used.
Monitor Out
Default Value : MAIN
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT MAIN jack
"SUB": When connecting the TV to the HDMI OUT SUB jack
The resolution of the input signal does not change when output through HDMI OUT SUB jack.
"MAIN+SUB": When connecting to both the MAIN and SUB jacks
Video signals input to the composite video input jack or the COMPONENT VIDEO input jacks will be upconverted to HDMI signals and then output from the HDMI output jack.
If "MAIN+SUB" is selected
–Only "Through" or "Auto" can be selected in "Resolution".
–The resolution of the input signal does not change when output through HDMI OUT SUB jack.
HDCP2.2 protected video from HDMI OUT SUB will not be displayed.
Resolution
Default Value : Through
Specify the output resolution of the HDMI OUT jacks. The image resolution of the unit will be converted so that it can match the resolution supported by the TV used.
"Through": The output resolution will be the same as that of the input signals.
"Auto": The resolution will automatically be converted according to the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p", "1080i", "1080p", "2560×1080p": Select the desired resolution.
"4K": About four times as high resolution as 1080p (3840×2160 or 4096×2160 pixels depending on the resolution supported by the connected TV)
If "1080p" is selected, 1080p/24 input signals will be output with an unchanged resolution.
If the selected resolution is not supported by the monitor, the video is displayed in the same resolution as the input signal.
If "4K" is selected, video signals may not be output to some types of TV. For details, see "Regarding the Video Resolution" in "Troubleshooting".
If "Monitor Out" is set to "SUB", this setting will be set to "Through".
Press ENTER if you output signals from the HDMI OUT MAIN jack and check the video on the TV while making this setting. Press RETURN if no video is displayed. (except when "NET", "USB" or "BLUETOOTH" is selected)
HDMI Input
It is possible to change assignment of input selector buttons and the HDMI IN jacks.
BD/DVD
Default Value : HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
CBL/SAT
Default Value : HDMI 2
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to CBL/SAT button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
STB/DVR
Default Value : HDMI 3 (HDCP2.2)
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to STB/DVR button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
GAME
Default Value : HDMI 4
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to GAME button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
PC
Default Value : HDMI 5
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to PC button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
AUX
Default Value : FRONT/MHL
The setting cannot be changed.
TV/CD
Default Value : -----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to TV/CD button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
PHONO
Default Value : -----
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to PHONO button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first.
Component Video Input
CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This assignment can be changed if necessary. If you do not assign a jack, select "-----".
BD/DVD
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to BD/DVD button.
CBL/SAT
Default Value : COMPONENT
"COMPONENT": COMPONENT VIDEO IN jack is assigned to CBL/SAT button.
STB/DVR
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to STB/DVR button.
GAME
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to GAME button.
PC
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to PC button.
AUX
Default Value : -----
The setting cannot be changed.
TV/CD
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to TV/CD button.
PHONO
Default Value : -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to PHONO button.
When you convert video signals input to the COMPONENT VIDEO IN jacks and output them from the HDMI OUT jack, set the output resolution of the player to 480i. If the input has 480p or higher resolution, an error message will appear.
When "Monitor Out" is set to "SUB", the 480i/576i component signals only will be output with an unchanged resolution. Video will not be displayed if the TV does not support the resolution.
When "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is set to "Through", the 480i/576i component signals will be output with their resolution unchanged. So, TV sets not supporting these resolutions will not be able to display video.
Composite Video Input
It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO IN V1 to 3 jacks.
BD/DVD
Default Value : -----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----".
CBL/SAT
Default Value : VIDEO 1
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to CBL/SAT button. If you do not assign a jack, select "-----".
STB/DVR
Default Value : VIDEO 2
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to STB/DVR button. If you do not assign a jack, select "-----".
GAME
Default Value : VIDEO 3
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to GAME button. If you do not assign a jack, select "-----".
PC
Default Value : -----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to PC button. If you do not assign a jack, select "-----".
AUX
Default Value : -----
The setting cannot be changed.
TV/CD
Default Value : -----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to TV/CD button. If you do not assign a jack, select "-----".
PHONO
Default Value : -----
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to PHONO button. If you do not assign a jack, select "-----".
When "Monitor Out" is set to "SUB", the 480i/576i composite signals only will be output with an unchanged resolution. Video will not be displayed if the TV does not support the resolution.
When "Monitor Out" is set to "MAIN" or "MAIN+SUB" and "Resolution" is set to "Through", the 480i/576i composite signals will be output with their resolution unchanged. So, TV sets not supporting these resolutions will not be able to display video.
Digital Audio Input
It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL 1 to 2/OPTICAL jacks.
BD/DVD
Default Value : COAXIAL 1
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----".
CBL/SAT
Default Value : COAXIAL 2
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to CBL/SAT button. If you do not assign a jack, select "-----".
STB/DVR
Default Value : -----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to STB/DVR button. If you do not assign a jack, select "-----".
GAME
Default Value : -----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to GAME button. If you do not assign a jack, select "-----".
PC
Default Value : -----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to PC button. If you do not assign a jack, select "-----".
AUX
Default Value : -----
The setting cannot be changed.
TV/CD
Default Value : OPTICAL
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to TV/CD button. If you do not assign a jack, select "-----".
PHONO
Default Value : -----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can be assigned to PHONO button. If you do not assign a jack, select "-----".
Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
