Troubleshooting

Video

There is no picture

 Make sure that all video connecting plugs are pushed in all the way.

 Make sure that each video component is properly connected.

 If the TV is connected to the HDMI OUT jack of the unit, set "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" to "MAIN" or "SUB" according to the output jack. If the playback source is connected to the video (composite) jack or component video jacks and you want to output the video to the TV via the HDMI OUT jack, set "HDMI Input" to "-----".

 If the video source is connected to a component video input, you must assign that input to an input selector, and your TV must be connected to COMPONENT VIDEO OUT terminal.

 If the video source is connected to a composite video input, your TV must be connected to the MONITOR OUT V terminal.

 If the video source is connected to an HDMI input, you must assign that input to an input selector, and your TV must be connected to the HDMI output(s).

 While the Pure Audio listening mode is selected, the analog video circuitry is turned off and only video signals input through HDMI IN can be output.

 Make sure the switching of input screens is proper at the monitor side such as a TV.

 When the image input from the composite video input terminal does not get displayed, make sure that the component video input terminal is not set to the selected input. If selected, images input from the composite video input terminal cannot be output to this input switching. If only composite video input terminal connection is used, set the component video input terminal to "----- ."

 Images of a component connected to the composite video input terminal cannot be output by converting on the monitor of a TV or other components connected to COMPONENT VIDEO OUT terminal.

 If the input selector to which the input from the TV connected to the HDMI OUT SUB jack is connected is changed on this unit when "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "MAIN+SUB", or "MAIN" and when outputting to Zone 2, the video from the TV connected to HDMI OUT MAIN stops displaying.

 "Resolution" is effective only for the HDMI OUT MAIN jack if "1. Input/Output Assign" - "Monitor Out" - "Monitor Out" is set to "MAIN+SUB".

There is no picture from a source connected to an HDMI IN

 Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported.

 Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the setting on the player.

The on-screen menus do not appear

 On your TV, make sure that the video input to which this unit is connected is selected.

 Set "On Screen Display" to "On" in "OSD Setup".

SN 29401690HTML_EN
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.