You can enable the control functions between the unit and external devices using the terminals below. Special devices or cable connections are necessary to enable the functions. For more information about preparation, contact the specialized stores.
Use the port for connection with a integrated control system that can enable home automation. Some integrated control systems provide a centralized operation with a single touch panel controller in order to control audio and video home appliances and security devices together. For more information about adopting an integrated control system, contact the specialized stores.
If you use a multiroom remote control kit such as commercially available Xantech and Niles with this jack, you can operate the unit with the remote controller even when you are in a separate room, or operate the unit with the remote controller even if its remote control sensor is difficult to see. For more information about adopting a multiroom remote control kit, contact the specialized stores.
You can enable power link operation when you connect the unit and an external device such as power amplifier equipped with 12V trigger input jack. When the Zone 2 or Zone 3 function of the unit is turned on, the power link operation will be activated with a control signal output from the 12V trigger output jack. The maximum control signal is 12V/150 mA for Zone 2 and 12V/25 mA for Zone 3. For connection, use a monaural mini plug cable.