Make the detailed volume setting of the unit.
Default Value: Absolute
Switch the volume display between the absolute value and relative value. The absolute value 82 is equivalent to the relative value 0dB.
"Absolute": Absolute value such as "0.5" to "99.5"
"Relative (THX)": Relative value such as "-81.5dB" and "+18.0dB"
If the absolute value is set to "82.0", "82.0Ref" will appear on the display and the "THX" indicator will flash.
Default Value: -∞dB
Set the volume lowered from the listening volume when muting is on.
Select a value from "-∞dB", "-50dB" to "-10dB". (in 10dB increments)
Default Value: Off
Set the maximum value to avoid too high volume. Select a value from "Off", "50" to "99".
Default Value: Last
Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "1" to "99" and "Max".
You cannot set a higher value than that of "Maximum Volume".
Default Value: 0dB
Adjust the volume level difference between speakers and headphones. Select a value between "-12dB" to "+12dB".
Make the setting of on-screen display function that can display the setting menu screen, volume operation screen and the like on the TV.
Default Value: On
Set whether or not to display the On Screen Display (OSD) on the TV.
"On": The operation screen will be displayed on the TV.
"Off": The operation screen will not be displayed on the TV.
The operation screen may not be displayed depending on the input signal even if "On" is selected. If the operation screen is not displayed, change the resolution of the connected device.
Default Value: English
Select the OSD language.
Default Value: 3min
Set the time to start the OSD screen saver. Select a value from "3min", "5min", "10min" and "Off".